JVC GY-HM250U Instructions Manual page 163

Memo :
When the menu or status is displayed,
0
display of the confirmation screen will
be put on hold.
If the menu is displayed on the camera
0
recorder, close the menu.
If the status is displayed on the camera
0
recorder, close the status display.
Pressing the Set button (R) on the
0
camera recorder while in the Remote
Edit Mode ends the Remote Edit Mode
forcibly and switches to the Camera
mode.
When FTP upload via the camera unit
0
is currently in progress, switching to the
Remote Edit mode is disabled.
4 Select the Upload mode.
Select the [Upload] tab.
5 Select the clip you want to upload.
A list of the recorded clips appears on the
0
[Clip List] screen.
Tap (click) the clip you want to upload to
0
select it.
Clips being selected are indicated by a check
0
mark.
Memo :
You can switch the displayed slot using the [Slot
0
A] and [Slot B] tabs.
You can use the [J-30] or [K+30] tab to jump to
0
the previous or next 30 clips on the list.
6 Select the upload operation.
Tap (click) the [Actions] button.
2015-01-24 T14:47:15 2015-01-24 T14:47:15
2015-01-24 T14:47:28
2015-01-24 T14:47:28
2015-01-24 T14:47:37
2015-01-24 T14:47:37
2015-01-24 T14:47:53
2015-01-24 T14:47:53
.
164
Uploading a Recording Clip via a Web Browser n
7 Select a method to upload the clips.
.
A Upload all clips
Uploads all the clips in the displayed slots.
Tap (click) to move to the [Clip Server]
screen.
B Upload OK clips
Uploads all clips in the displayed slots that
are appended with an OK mark.
Tap (click) to move to the [Clip Server]
screen.
C Upload selected clips
Uploads the clips you have selected.
Tap (click) to move to the [Clip Server]
screen.
D Clear all selection
Clears all clip selection and returns to the
[Clip List] screen.
4
6
5
A
B
C
D