Preparing For Connection; Connecting Via Wired Lan - JVC GY-DS100U Detailed User Manual

Preparing for Connection

Operating Environment
Operation has been verified for the following environments.
Computer
o
OS: Windows 7
0
Web browser: Internet Explorer 11
OS: Windows 10
0
Web browser: Edge
OS: Mac OS X
0
Web browser: Safari 11
Smartphone/Tablet Terminal
o
OS: iOS11 (iPhone 7)
0
Web browser: Safari 11
OS: iOS11 (iPad 5th generation)
0
Web browser: Safari 11
OS: Android 7 (Nexus9)
0
Web browser: Chrome
OS: Windows 8.1 (Surface)
0
Web browser: Internet Explorer 11
Preparation on the Camera
Attaching an Ethernet Adapter or Wireless LAN Adapter to
o
the USB Host Terminal of this Unit
Connect or disconnect an adapter only after you have turned off the power
0
of the camera recorder.
1
Enable the network connection.
Set "MENU"F"System"F"Network" to "On".
.
2
Configure the connection settings.
Tap "Settings" that is directly below "Network", select "Connection
Setup" and tap "SET".
Connection Setup
.
A wizard screen appears. Follow the instructions on the screen to
0
perform setting.
On
Off

Connecting via Wired LAN

Connect a smartphone, tablet terminal or PC to this video camera directly
using a cross-over cable or via devices such as an Ethernet hub to access
the web function of the camera.
1
Connect the [HOST] terminal on the camera to the smartphone, tablet
terminal, PC, etc. using a cross cable.
2
Perform setting on the camera, and start up the [Wizard] screen.
3
[Ethernet] appears on the [Wizard] screen.
Available Adapter
.
4
Press the 1 button to display the [IP Address Configuration] screen.
Follow the screen instructions to complete setting. Perform setting for
the following.
IP address setting (DHCP or manual)
0
IP Address
0
Subnet Mask
0
Gateway
0
DNS Server
0
IP Address Configuration
DHCP
Manual
.
5
Setting is complete.
After setting is complete, you can access the camera via a web browser.
Using the Network
Eathernet
75