Detail/Adjust Item; White Balance Item - JVC GY-HM250U Instructions Manual

Detail/Adjust Item

V/H Balance
For setting the H/V balance to enhance contour
(detail) in the horizontal (H) or vertical (V) direction.
H+1 to H+4:
0
Increasing the value enhances contour in the
horizontal direction.
V+1 to V+4:
0
Increasing the value enhances contour in the
vertical direction.
[Setting Values: H+1 to H+4, RNormal, V+1 to V+4]
Memo :
When [System] under [Record Format] is set to
0
"SD", this item is fixed at "Normal".
When [System] under [Record Format] is set to
0
"HD+Web", this item can be set during HD
recording, but will be fixed at "Normal" during SD
recording.

White Balance Item

Preset Temp.
For setting the color temperature when the
[WHT.BAL B/A/PRST] switch is set to "PRST".
For details, refer to "[Adjusting the White Balance]
(A P 61)".
Alternative Temp.
For setting the alternative color temperature in the
Preset mode.
When the [WHT.BAL B/A/PRST] switch is set to
"PRST", pressing the [AWB/9] button each time
switches the color temperature setting in the Preset
mode. ([Preset Temp.]1[Alternative Temp.])
For details, refer to "[Adjusting the White Balance]
(A P 61)".
AWB Paint
For adjusting the R (red)/B (blue) component in the
AWB (Auto White Balance) mode.
For details, refer to "[Adjusting the White Balance]
(A P 61)".
Increase the number:
0
Strengthens the red/blue.
Decrease the number:
0
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
Memo :
This item is selectable when the [WHT.BAL
0
B/A/PRST] switch on the right of the camera
recorder is set to "A" or "B". When "PRST" is set,
this item appears as "---" and cannot be
selected.
Different values can be specified for "A" and "B".
0
When [Clear Paint After AWB] is set to "On",
0
pressing the [AWB/9] button to readjust the
white balance switches the R and B values
automatically to "0".
Clear Paint After AWB
For specifying whether to clear the [AWB Paint] (R
value and B value) settings after executing AWB
(Auto White Balance).
On:
0
Sets the [AWB Paint] (R value and B value)
settings to "0" after executing AWB (Auto White
Balance).
Off:
0
Does not change the [AWB Paint] (R value and
B value) settings after executing AWB (Auto
White Balance).
[Setting Values: ROn, Off]
FAW Paint
For adjusting the R (red)/B (blue) component
during FAW (Full Auto White Balance) mode.
Increase the number:
0
Strengthens the red/blue.
Decrease the number:
0
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
Camera Process Menu
105