Formatting (Initializing) Sd Cards - JVC GY-HM250U Instructions Manual

Switching the SD cards
When both card slots are inserted with SD cards,
you can use the [SLOT SEL] button to switch the
card to use.
When the memory on an SD card is full during
recording, data recording automatically switches to
the other card.
.
Memo :
The [SLOT SEL] button is disabled during
0
recording or playback. Cards will not be
switched even if you press the button.

Formatting (Initializing) SD Cards

When the following cards are inserted, [!FORMAT]
appears at the remaining media display area.
Format the card using the camera recorder menu.
Unformatted SD cards
0
SD cards formatted under different
0
specifications
* For details of the menu operation, refer to
"[Basic Operations in Menu Screen]
(A P 93)".
Caution :
Be sure to format the SD card on this camera
0
recorder. SD cards formatted on a PC and other
peripheral equipment cannot be used on this
camera recorder.
[!RESTORE] appears at the remaining media
0
display area when an SD card that requires
restoring is inserted.
42
SD Card
1 Select [System] B [Media] B [Format
Media].
(A P115 [ Format Media ] )
2 Select the slot of the SD card to be
formatted and press the Set button (R).
Format Media
Format Slot A
Format Slot B
.
3 The status of the selected SD card appears.
4 Select [Format] and press the Set button
(R).
Format Media
Format
Cancel
.
5 Formatting starts.
Formatting...
.
2
Set
4
Set