Tc/Ub Menu - JVC GY-HM250U Instructions Manual

TC/UB Menu

Menu screen for setting time code and user's bit.
This item cannot be selected in the Media mode,
or during recording.
TC Generator
For setting the operation of the time code.
Free Run:
0
The time code operates in the run mode at all
times regardless of the recording status. It
continues to run even when the power of the
camera recorder is turned off.
Rec Run:
0
The time code operates in the run mode during
recording. It continues to run in the order of the
recorded clips as long as the SD card is not
replaced. If the SD card is removed and
recording is made on another card, time code
will be recorded on the new card from where it
was left off in the previous card.
Regen:
0
The time code operates in the run mode during
recording. When the SD card is replaced, the
last time code recorded on the card is read and
recorded on a new card so that the time code
continues in running order.
[Setting Values: Free Run, RRec Run, Regen]
TC Preset
For setting the time code (hour, minute, second,
frame).
Display : Drop setting 02:02:25.20
: Non Drop setting 02:02:25:20
UB Mode
For setting the recording mode of the user's bit.
Date:
0
Records the date.
Time:
0
Records the time.
Preset:
0
Records according to the preset setting.
(A P72 [Setting the User's Bit] )
[Setting Values: Date, Time, RPreset]
Memo :
If UB Mode is set to "Time", the user's bit
0
operates in the 24-hour format even if the LCD
display is in the 12-hour format.
106
TC/UB Menu
9 Preset
For setting the user's bit. (Digit by digit)
Display : AB CD EF 01
(A P72 [Presetting the User's Bit] )
Memo :
When [UB Mode] is set to "Date" or "Time", this
0
item appears as "---" and preset is disabled.
Drop Frame
For setting the framing mode of the time code
generator.
Non Drop:
0
Internal time code generator works in the non-
drop-frame mode. Use this setting when placing
emphasis on the number of frames.
Drop:
0
Internal time code generator works in the drop-
frame mode. Use this setting when placing
emphasis on the recording time.
[Setting Values: Non Drop, RDrop]
Memo :
This item can be set only when [Main Menu] B
0
[System] B [Record Set] B [Record Format] B
[WFrame Rate] is set to "60p", "30p", or "60i".
When [Frame Rate] is "24p", "Non Drop"
becomes fixed and cannot be selected. When
[Frame Rate] is "50p", "25p", or "50i", this item
appears as "---" and cannot be selected.
(A P118 [ W Frame Rate ] )