Using Ac Power (Dc In Power); Power Status Display - JVC GY-HM250U Instructions Manual

Using AC Power (DC IN Power)

Use the supplied AC adapter to operate the camera
recorder with AC power.
2
.
1 Connect the DC cable of the AC adapter to
the [DC] terminal of the camera recorder.
Check that the power switch of the camera
0
recorder is set to "OFF".
Open the cover of the [DC] terminal and
0
connect as shown in the diagram.
2 Hold down the lock button (blue) at the
center of the [POWER ON/OFF] switch to set
to "ON".
Power will be supplied to the camera recorder.
Caution :
Do not insert or remove the DC cable during
0
recording.
Do not use power supply of high voltage
0
fluctuation, containing noise such as ripple, or
with insufficient capacity.
Charging the Built-In Battery
The date/time and time code data are stored
0
using the built-in rechargeable battery.
When power is connected to the camera
0
recorder, the built-in battery always gets
charged. When the power is disconnected, the
battery gradually discharges.
The battery will be totally discharged if left
0
unused for 3 months and the date/time and time
code data will be reset. When this happens, set
the [POWER ON/OFF] switch to "ON" to display
the [Initial Setting] screen, then set the date/
time.
(A P33 [Initial Settings] )

Power Status Display

Viewfinder Screen and LCD Monitor
The power status is displayed on the display and
menu screens.
Display
B 7.4V
B 100min
C 30%
4 RES
1
F
T
G
P
Q
R
S
Memo :
If the supplied battery (or equivalent battery sold
0
separately) is not used, the battery mark which
indicates the battery level may not appear.
Display Screen
(A P132 [Display Screen in Camera Mode] )
(A P138 [Display Screen in Media Mode] )
282min
100min
50min
3840x2160
30p 150M
4030 20 10 0
.
Description
Currently powered by a battery.
When the battery power runs out,
the battery mark appears hollow,
and "RES" (yellow) is displayed.
Memo :
You can set the display using
0
[LCD/VF] B [Display Settings]
B [Battery].
(A P110 [ Battery ] )
Acquisition of battery information
may fail if a genuine battery is not
used.
Appears when an error occurs
during battery charging.
Currently powered by an AC
adapter.
Camera recorder battery charging
in progress.
(A P110 [Details on charging
condition] )
00: 00: 00.00
Jan 24,2015
12 :34 :56
5 . 6f t
ND 1 /16
AE 6
+
18
dB
F1.6
P 15000K 1/ 100
Power Supply
31