Preparing Network Connection N; Operating Environment; Camera Setup For Network Connection - JVC GY-HM250U Instructions Manual

Preparing Network
Connection n

Operating Environment

Operation has been verified for the following
environments.
Computer
OS: Windows 7
0
Web browser: Internet Explorer 11
OS: Mac OSX 10.9
0
Web browser: Safari 7
Smartphone/Tablet Terminal
OS: iOS8 (iPhone 5)
0
Web browser: Safari 7
OS: iOS8 (iPad 3rd generation)
0
Web browser: Safari 7
OS: Android 4 (Nexus 7 2013)
0
Web browser: Chrome
OS: Windows 8.1 (Surface)
0
Web browser: Internet Explorer 11
150

Preparing Network Connection n

Camera Setup for Network Connection

1 Connect an appropriate adapter according
to the intended use to the [HOST] terminal
at the side terminal section of the camera
recorder.
The following adapters can be connected.
Wireless LAN adapter
0
Ethernet adapter
0
Cellular adapter
0
Connect an appropriate adapter
.
Memo :
Only a network connection adapter can be
0
connected to the [HOST] terminal.
Connect or disconnect an adapter only after you
0
have turned off the power of the camera
recorder.
You can find the latest information on the
0
compatible adapters at the product page of our
website.
Two types of network coverage (WAN and LAN)
0
are available for each application.
2 Enable the network connection.
Set [Main Menu] B [System] B [Network] to
"On".
Memo :
When [Main Menu] B [System] B [Record Set]
0
B [System] is set to "4K", set [Main Menu] B
[System] B [Record Set] B [Network Function]
to "Enable".
(A P119 [ Network Function ] )
3 Configure the connection settings.
Select [Main Menu] B [System] B [Network]/
0
[Settings] B [Connection Setup] B [Wizard]
and press the Set button (R).
A wizard screen appears according to the
0
type of adapter connected. Follow the
instructions on the screen to perform setting.
(A P151 [Connecting via Wireless LAN] )
(A P152 [Connecting via Wired LAN] )
(A P153 [Connecting via Cellular Adapter] )