Shooting; Basic Shooting Procedures - JVC GY-HM250U Instructions Manual

Basic Shooting
Procedures
Preparations
3
4
2
.
1 Supply battery or AC adapter power to the
camera recorder.
(A P29 [Power Supply] )
2 Insert an SD card.
(A P40 [SD Card] )
3 Turn on the power of the camera recorder.
Hold down the lock button (blue) at the center of
the [POWER ON/OFF] switch to set to "ON". The
camera recorder starts up in Camera mode and
is ready for recording.
4 Adjust the angle of the LCD monitor and
viewfinder.
(A P37 [Adjusting the LCD Monitor and
Viewfinder] )
46

Basic Shooting Procedures

Shooting

The [FULL AUTO] button of this camera recorder
is set to "ON" by default, the following video items
are automatically adjusted.
Iris
0
Gain
0
Shutter
0
White balance
0
The audio recording level is also set to Auto, and
4 audio from the built-in microphone is recorded.
When the [FULL AUTO] button is set to "ON", the
v icon appears at the lower center area of the LCD.
1
4030 20 10 0
.
* Press and hold the [FULL AUTO] button to
switch the Full Auto mode ON and OFF.
Memo :
To set each individual video setting item
0
automatically or manually, and to carry out the
audio input settings and the audio recording
level adjustment, refer to the following.
[Adjusting the Brightness] (A P 55)
0
[Adjusting the Iris] (A P 56)
0
[Setting the Gain] (A P 57)
0
[Setting the Electronic Shutter] (A P 58)
0
[Adjusting the White Balance] (A P 61)
0
[Selecting Audio to Be Recorded in Each
0
Channel O] (A P 65)
[Adjusting the Audio Recording Level O]
0
(A P 66)
.
00: 00: 00.00
Jan 24 ,2015
12 :34 : 56
ND 1 /16
AE 6
+
P 15000K