Registering/Deleting Preset Zoom - JVC GY-HM250U Instructions Manual

A Page Switch Tab
Tap (click) this tab to move to the [Planning
Metadata], [Clip Metadata], or [Settings]
screen.
B Live View Screen
Displays the live images.
Tap a live image to display or hide information
that is displayed on the live image, such as
remaining space on the media and time code.
C [Clear] Button
Switches to the Delete Preset Zoom Position
mode.
(A P167 [Registering/Deleting Preset Zoom] )
(A P168 [Deleting a Preset Zoom] )
D [Preset] Button
Switches to the Register Preset Zoom Position
mode.
(A P167 [Registering Preset Zoom] )
E [A]/[B]/[C] Buttons
Use these buttons to perform preset registration
or delete a preset data.
F Zoom Control
Operate the zoom function by dragging the
0
zoom button along the sliding bar.
Tap (click) the [Wide] or [Tele] button to fine-
0
tune the zoom position.
The slide changes according to the dynamic
0
zoom.
(A P99 [ Dynamic Zoom ] )
Dynamic Zoom Off:
.
Dynamic Zoom On:
.
G Function Lock Button
Locks the functions that have been set on the
[Settings] screen.
(A P171 [Changing View Remote Function
Settings] )
Icon
Locked
.
Not locked
.
H Stop Record Button
I Start Record Button
J Camera Control Function
(A P169 [Camera Control Function n] )
Description

Registering/Deleting Preset Zoom

Registering Preset Zoom
You can register any 3 zoom positions.
1 Set to the Register Preset Zoom mode.
Tap (click) the [Preset] button to switch to the
Register Preset Zoom mode.
CAMERA1 CAMERA1
26min 26min
50min 50min
282min 282min
STBY STBY
.
2 Determine the zoom position.
Use the zoom control to operate the zoom and
determine a position.
3 Tap (click) [A].
Position [A] is registered, and position A is
displayed on the sliding bar of the zoom control.
CAMERA1 CAMERA1
26min 26min
50min 50min
282min 282min
STBY STBY
.
View Remote Feature n
01:12:54.19 01:12:54.19
Z 0 Z 0
01:12:54.19 01:12:54.19
Z 0 Z 0
167