Configuring Setup Files; Saving Setup Files - JVC GY-HM250U Instructions Manual

Configuring Setup Files

The menu settings can be stored on an SD card by
saving them as a setup file.
Loading a saved setup file enables you to
reproduce the appropriate setup state speedily.
The following types of setup files are available.
o Picture File:
File that contains image creation settings in
accordance to the shooting conditions ([Camera
Process] menu items).
o All File:
File that contains all menu settings, ranging from
video format settings to image creation settings
such as device settings and shooting
conditions, as well as the contents of the
[Favorites Menu]. Settings in Overlay Settings
and Network Settings are not saved.
o User File:
File that contains settings from All File that are
not included in the [Camera Process] menu
items.
(A P102 [Camera Process Menu] )
Memo :
Make use of the [Setup File] menu to save or
0
load a setup file.
The following operations can be performed on
0
the [Setup File] menu.
[Saving Setup Files] (A P 143)
0
[Loading a Setup File] (A P 144)
0
Number of Storable Setup Files
SD slot A : [ W 1 ] to [ W 8 ]
SD slot B : [ Y 1 ] to [ Y 8 ]
Compatibility
o User File/All File
Only User File/All File of the GY-HM250 and
0
GY-HM180 series can be loaded.
When User File/All File saved using GY-
0
HM250 are loaded using GY-HM180, the
functions that only exist on GY-HM250 are
ignored.
o Picture File
Only Picture File of the GY-HM250 and GY-
HM180 series can be loaded.

Saving Setup Files

1 Display the [Setup File] menu.
Select [Main Menu] B [System] B [Setup File]
and press the Set button (R).
(A P115 [ Setup File ] )
2 Select [Store File] and press the Set button
(R).
3 Select [Picture File], [User File] or [All File],
and press the Set button (R).
The existing files are displayed.
4 Select the file to be newly saved (or
overwritten) using the cross-shaped
button (JK), and press the Set button (R).
Store Picture File
<no file>
<no file>
<no file>
<no file>
<no file>
<no file>
.
Memo :
Files cannot be written in the following cases.
0
(Displayed in gray, selection disabled)
When the inserted SD card is not supported or
0
not formatted. (File name appears as "---".)
When a write-protected SD card is inserted
0
(a z mark appears beside the SD card icon).
5 Name the file.
Enter the subname using the software
0
keyboard.
(A P95 [Text Input with Software Keyboard] )
You can enter up to 8 characters for the
0
[Store File]/[Picture File] subname.
Memo :
When overwriting an existing file, the subname
0
of the existing file is displayed.
Select [Cancel] and press the Set button (R), or
0
press the [CANCEL/STOP] button to return to
the previous screen.
Configuring Setup Files
4
143