JVC GY-HM250U Instructions Manual page 167

4 In the same way, register [B] and [C].
After all three positions A, B and C are
registered, the positions of the [A], [B], and [C]
buttons will be rearranged according to the
order of the registered zoom position from the
left.
CAMERA1 CAMERA1
26min 26min
50min 50min
282min 282min
STBY STBY
.
5 Exit the Register Preset Zoom mode.
Tap (click) the [Preset] button to exit the
Register Preset Zoom mode.
Memo :
After registration is complete ([A], [B], and [C]
0
buttons are all active), tapping (clicking) each
button switches to the corresponding preset
zoom position.
This function operates independently of the
0
preset zoom position on the camera recorder.
(A P50 [Saving/Recalling Current Zoom
Position (Preset Zoom)] )
When the dynamic zoom is on, the preset button
0
where the dynamic zoom position is registered
grays out when the dynamic zoom is off and the
zoom position cannot be changed.
When the dynamic zoom is off, the dynamic
0
zoom position cannot be registered.
168
View Remote Feature n
01:12:54.19 01:12:54.19
Z 0 Z 0
Deleting a Preset Zoom
1 Set to the Delete Preset Zoom mode.
When any of positions [A], [B], and [C] are
registered, tapping (clicking) the [Clear] button
switches to the Delete Preset Zoom mode.
CAMERA1 CAMERA1
26min 26min
50min 50min
282min 282min
STBY STBY
.
2 Tap (click) the [A], [B], or [C] button that
corresponds to the position you want to
delete.
The position is deleted, and the button is
0
grayed out.
The corresponding zoom position mark on
0
the sliding bar also disappears.
CAMERA1 CAMERA1
26min 26min
50min 50min
282min 282min
STBY STBY
.
3 Exit the Delete Preset Zoom mode.
Tap (click) the [Clear] button to exit the Delete
Preset Zoom mode.
Memo :
The Clip Review function of the camera recorder
0
is unavailable during View Remote operation.
(A P73 [Viewing Recorded Videos Immediately
(Clip Review)] )
01:12:54.19 01:12:54.19
Z 0 Z 0
01:12:54.19 01:12:54.19
Z 0 Z 0
Grayed out
Position mark
disappears