JVC GY-HM250U Instructions Manual page 134

Memo :
You can specify the display method (Feet/
0
Meter) in [Main Menu] B [LCD/VF] B [Display
Settings] B [Focus].
This item will not be displayed when "Off" is
selected.
(A P109 [ Focus ] )
Displayed in the Display 0 screen only when
0
there is a change.
R Zebra pattern
During zebra pattern display,
is displayed on the display screen in Camera
mode.
(A P73 [Setting Zebra Pattern] )
S Focus Assist
"FOCUS" is displayed when auto focus is
0
activated.
When ACCU-Focus is enabled, "ACCU-
0
FOCUS" blinks for about 10 seconds while
Focus Assist starts up, after which the
"FOCUS" indicator lights up.
If recording starts while [ACCU-Focus] is
0
active, [ACCU-Focus] will be forcibly
deactivated.
(A P108 [ Focus Assist ] )
Memo :
Displayed in the Display 0 screen only when
0
there is a change.
T Date/Time Display
Displays the current date and time.
Memo :
The date/time display style can be specified in
0
[Main Menu] B [LCD/VF] B [Display Settings] B
[Date Style]/[Time Style].
(A P110 [ Date Style ] )
(A P111 [ Time Style ] )
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Date/Time] is
set to "Off".
(A P110 [ Date/Time ] )
When [Main Menu] B [System] B [Record Set]
0
B [Time Stamp] is set to "On", this item is not
displayed.
(A P120 [ Time Stamp ] )
U Zoom Display
Displays the zoom position. (Zoom bar or
0
value)
.
.
The zoom bar will only be displayed for 3
0
seconds after the zoom operation is
(zebra icon)
activated.
The value will always be displayed.
0
Dynamic Zoom Off : Z00 to 99
Dynamic Zoom On : Z100 to 149
Memo :
You can specify the display method (Number/
0
Bar) in [LCD/VF] B [Display Settings] B "Zoom".
This item will not be displayed when "Off" is
selected.
(A P109 [ Zoom ] )
Displayed in the Display 0 screen only when
0
there is a change.
V Network Connection Icon n
The network connection status is displayed
when [Main Menu] B [System] B [Network] is
set to "On".
This icon is not displayed when "Off" is selected.
(A P116 [ Network n ] )
(Yellow)
(No display) When an incompatible USB
Memo :
When a cellular adapter that supports LTE
0
connection display is in use, "LTE" will appear to
the left of the above icon when LTE connection
is detected.
Dynamic Zoom Off:
Dynamic Zoom On:
Icon
Connection is not established
(starting up, preparing for
connection)
.
(Blink)
Connection is not established
(preparing for connection)
.
Connection is established
.
When a USB adapter different
from the connection settings is
detected
.
adapter is detected, or when
[Network] is set to "Off"
Display Screen in Camera Mode
Status
135