Camera Setup For Network Connection; Connecting Via Wireless Lan - JVC GY-HM650U Instructions Manual

Camera Setup for Network Connection

1 Connect an appropriate adapter according
to the intended use to the [HOST] terminal
at the rear of the camera recorder.
The following adapters can be connected.
USB wireless LAN adapter
0
USB-Ethernet adapter
0
USB-Cellular adapter
0
HOST
Connect an appropriate adapter
Memo :
Only a network connection adapter can be
0
connected to the [HOST] terminal.
Connect or disconnect an adapter only after you
0
have turned off the power of the camera
recorder.
You can find the latest information on the
0
compatible adapters at the product page of our
website.
Two types of network coverage (WAN and LAN)
0
are available for each application.
2 Enable the network connection.
Set [Main Menu] B [System] B [Network] to
"On(HDMI Off)" or "On(SDI Off)".
3 Configure the connection settings.
Select [Main Menu] B [System] B
0
[Network] B [Settings] B [Connection
Setup] B [Wizard] and press the Set button
(R).
A wizard screen appears according to the
0
type of adapter connected. Follow the
instructions on the screen to perform setting.
(A P139 [Connecting via Wireless LAN] )
(A P141 [Connecting via Wired LAN] )
(A P141 [Connecting via 3G Adapter] )

Connecting via Wireless LAN

Connection via Access Point
1 Perform setting on the camera recorder,
and start up the [Wizard] screen.
(A P139 [Camera Setup for Network
Connection] )
2 [Wireless LAN] appears on the [Wizard]
screen.
3 Press the I button to display the [Select
Connection Type] screen.
Select "Connect with Access Point".
Follow the screen instructions to complete
setting. Perform setting for the following.
Mode of connection
0
Method of setting
0
* SSID, type of encryption, Passphrase, and
IP Address setting ("DHCP" or "Manual") in
cases other than WPS
4 Setting is complete.
After setting is complete, you can access the
camera recorder via a browser.
(A P146 [Connecting via a Browser] )
3
139