Detail/Adjust Item - JVC GY-HM660U Instruction

Shooting Mode
For switching the settings for image recording on
the camera.
Standard:
0
Normal shooting mode.
This setting is suitable for shooting low-noise
image quality.
Use this mode in well lit places.
Extended:
0
High sensitivity shooting mode.
This setting enables recording in various
brightness conditions.
Use this mode in places where the lighting is
difficult to control and the brightness is
insufficient.
[Setting Values: RStandard, Extended]
Reset Process
Restores all items in the [Camera Process] menu
to their default settings.

Detail/Adjust Item

V/H Balance
For setting the H/V balance to enhance contour
(detail) in the horizontal (H) or vertical (V) direction.
H+1 to H+4:
0
Increasing the value enhances contour in the
horizontal direction.
V+1 to V+4:
0
Increasing the value enhances contour in the
vertical direction.
[Setting Values: H+1 to H+4, RNormal, V+1 to V+4]
Memo :
When [System] under [Record Format] is set to
0
"SD", this item is fixed at "Normal".
When [System] under [Record Format] is set to
0
"HD+SD", this item can be set during HD
recording, but will be fixed at "Normal" during SD
recording.
When [System] under [Record Format] is set to
0
"HD+SD", this item can be set during HD
recording, but will be fixed at "Normal" during SD
recording. a
H Frequency
For specifying the correction frequency of the
horizontal contour. Set this according to the object.
High:
0
Emphasizes the high frequency range. Use this
when shooting objects with fine patterns.
Middle:
0
Emphasizes the intermediate frequency range.
Low:
0
Emphasizes the low frequency range. Use this
when shooting objects with large patterns.
[Setting Values: High, RMiddle, Low]
Memo :
When [System] under [Record Format] is set to
0
"SD", this item is fixed at "Low".
When [System] under [Record Format] is set to
0
"HD+SD", this item can be set during HD
recording, but will be fixed at "Low" during SD
recording. a
V Frequency
For specifying the correction frequency of the
vertical contour. Set this according to the object.
Low:
0
Emphasizes the low frequency range.
Middle:
0
Emphasizes the intermediate frequency range.
High:
0
Emphasizes the high frequency range.
[Setting Values: Low, RMiddle, High]
Memo :
When [System] under [Record Format] is set to
0
"SD", this item is fixed at "Low".
(A P117 [ Record Format ] )
When [System] under [Record Format] is set to
0
"HD+SD", this item can be set during HD
recording, but will be fixed at "Low" during SD
recording. a
"High" cannot be selected under the following
0
settings.
When [WResolution] is set to "1920x1080",
0
and [WFrame & Bit Rate] is set to "60i" or
"50i"
When [WResolution] is set to "1440x1080",
0
and [WFrame & Bit Rate] is set to "60i" or
"50i"
105