Detail/Adjust Item - JVC GY-HM650U Instructions Manual

Color Matrix
For setting the color matrix.
Cinema Subdued:
0
Sets to a subdued color matrix that is similar to
the screen characteristics of movies.
Cinema Vivid:
0
Sets to a vivid color matrix that is similar to the
screen characteristics of movies.
Standard:
0
Sets to a standard color matrix.
Off:
0
Sets the color matrix function to Off.
[Setting Values: Cinema Subdued, Cinema Vivid,
RStandard, Off]
9 Adjust
This item is used to adjust [Color Matrix] to a color
according to the user's preference.
This item is used to adjust [Color Matrix] to a
0
color according to the user's preference.
The saturation, hue and brightness of the
0
primary and complementary colors (6 colors in
total) can be set individually.
The adjusted values of "Standard", "Cinema
0
Vivid", and "Cinema Subdued" in [Color Matrix]
can be stored individually.
(A P138 [Adjusting Color Matrix] )
[Setting range for Lightness/Saturation: -10 to +10]
(roughly ± 10 %)
[Setting range for Hue: -5 to +5] (roughly ± 5°)
Memo :
This item cannot be selected when [Color
0
Matrix] is set to "Off".
Color Gain
For adjusting the video signal color level.
Increasing the value deepens the color.
[Setting Values: -50 to +15, Off (R0)]
Memo :
Images are displayed in black-and-white when
0
this is set to "Off".
Reverse Picture
For recording images correctly by setting this item
to "Rotate" when the lens image appears upside
down or laterally inverted.
Rotate:
0
Enables horizontal/vertical inversion of the
image.
Off:
0
Disables horizontal/vertical inversion of the
image.
[Setting Values: Rotate, ROff]
104
Shooting Mode
For switching the settings for image recording on
the camera.
Standard:
0
Normal shooting mode.
This setting is suitable for shooting low-noise
image quality.
Use this mode in well lit places.
Extended:
0
High sensitivity shooting mode.
This setting enables recording in various
brightness conditions.
Use this mode in places where the lighting is
difficult to control and the brightness is
insufficient.
[Setting Values: RStandard, Extended]
Reset Process
Restores all items in the [Camera Process] menu
to their default settings.

Detail/Adjust Item

V/H Balance
For setting the H/V balance to enhance contour
(detail) in the horizontal (H) or vertical (V) direction.
H+1 to H+4:
0
Increasing the value enhances contour in the
horizontal direction.
V+1 to V+4:
0
Increasing the value enhances contour in the
vertical direction.
[Setting Values: H+1 to H+4, RNormal, V+1 to V+4]
Memo :
When [System] under [Record Format] is set to
0
"SD", this item is fixed at "Normal".
When [System] under [Record Format] is set to
0
"HD+SD", this item can be set during HD
recording, but will be fixed at "Normal" during SD
recording.