Hot Water Delivery; Regulation Of The Hot Water Temperature; Steam Delivery - Wega Concept Use And Maintenance Manual

13.4

Hot water delivery

• Place the cup under the hot water nozzle (
• press the hot water key
water;
• To stop delivery in advance, press the hot water key
again .
!
When the machine is cool (pressure below 0,6 bar)
the delivery of hot water is not active.
13.5 Regulation of the hot water
temperature
To change the temperature of the output hot water,
proceed as follows:
• remove the grids and drain pad (
• remove the protection under the pad (
A):
• rotate the knob (
- to increase the temperature turn clockwise
- to decrease the temperature turn counter-
clockwise
i
By completely turning the knob clockwise, only
steam will come out of the hot water dispenser.
Technical manual
12);
, wait for the delivery of
8a);
8b);
+
-
A
8b 8a
13.6

Steam delivery

Immerge the steam nozzle into the liquid to be
heated and operate the tap knob (5), by turning it
horizontally: the steam coming out of the nozzle (7) will
be proportional to the opening of the tap.
If the knob is released, it will return to the off position,
stopping the delivery.
12
By moving the knob vertically, it is possible to lock it
in the constant on position, in order to have a continuous
delivery of steam.
To stop the outfl ow of steam through the nozzle,
manually return the knob to the OFF status, disengaging
it from the on position.
Shutdown
Automatic
return
Shutdown
To obtain optimal foaming, it is recommended to
observe the following simple rules:
• heat only the amount of milk you intend to use, once
heated, it will have to be completely poured from the
jug and not heated again ;
• the milk to be foamed must have a starting tempera-
ture of 4°C;
Wegaconcept
5
6
7
Automatic
return
OFF
23