23.14 Setting The Date; 23.15 Setting The Working Days - Wega Concept Use And Maintenance Manual

Wegaconcept

23.14 Setting the date

To set the time and date shown on the display,
proceed as follows:
ENTER
Hold down the ENTER button for at least 5 seconds.
(x 5 secs.)

Scroll the menu until the item is highlighted
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
ENTER Confi rm to access the menu
CLOCK SET-UP
H:M DD-MM-YY D
Scroll the menu until the item to be modifi ed is high-

lighted

Modify the parameter

Switch to another parameter and repeat the operation
ENTER Confi rm to exit the menu.
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS

To exit the programming menu
H hours
M minutes
DD day
MN month
YY year
D day of the week
Legend
46
1 Monday
2 Tuesday
3 Wednesday

4 Thursday
5 Friday
6 Saturday
7 Sunday

23.15 Setting the working days

To program the start-up and shutdown of the
machine, proceed as follows:
ENTER
Hold down the ENTER button for at least 5 seconds.
(x 5 secs.)

Scroll the menu until the item is highlighted
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS
ENTER Confi rm to access the menu
WORKING DAYS
1 2 3 4 5 6 7
Scroll the menu until the parameter to be highlighted

is modifi ed

Enable or disable the working day.

Switch to another day and repeat the operation
ENTER Confi rm to exit the menu.
09 FILTER REGENERAT.
10 COUNTERS
11 CLOCK SETUP
12 WORKING DAYS

To exit the programming menu
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
i
By setting the "-" character the machine will stay off
or in energy saving mode depending on the day of
the week (example 1 2 - 4 5 6 7 : the machine stays
off on Wednesdays).
Technical manual