Confi Guration Of Groups Proper Use - Wega Concept Use And Maintenance Manual

Wegaconcept
Time of the second stand-by period of the delivery groups:
STANDBY 2 TIME
FROM HR:MN
Set the start time for stand-by To switch from hours

(HR) to minutes (MN) press the () key.

Once the minutes (MN) are set, press ().
STANDBY 2 TIME
Set the start time for stand-by To switch from hours

(HR) to minutes (MN) press the () key.
Once the minutes (MN) are set, press ().

Programming the energy saving time of the machine.
Time of activation of machine Energy Saving
REST TIME
Set the start time for stand-by To switch from hours

(HR) to minutes (MN) press the () key.
ENTER Confi rm to exit the menu.
05 ENERGYSAVE TIMING
06 WORKING MODE
07 STBY MODE
08 AUTOSTEAMER MODE

to exit the programming menu
i
If you want to program the stand-by and/or
inactivity time of the machine, set the hour to
00:00.
42
TO HR:MN
HR:MN
23.9

Confi guration of groups proper use

To confi gure proper use of the single delivery groups,
proceed as follows:
Enter
Hold down the ENTER button for at least 5 seconds.
(x 5 secs.)

Scroll the menu until the item is highlighted
05 ENERGYSAVE TIMING
06 WORKING MODE
07 STBY MODE
08 AUTOSTEAMER MODE
ENTER Confi rm to access the menu
SET ON/STBY/OFF
Set the operating mode of group 1: ON always active,

STBY, confi g. stand-by, OFF always inactive
Confi rm and go to next group Repeat the operation for
each delivery group.

Once the last group has been set, the display will show
the Energy Saving settings
SET ON/ESAV/OFF
STAND-BY XXX
Set the machine stand-by mode: ON machine always

on, ESAV set on Energy Saving, OFF completely turned
off .

Confi rm and move to the next screen.
REDUCED SETPOINT
STBY TEMP. XXX.C
Set the temperature of the groups in the stand-by

phase
Confi rm and go to programming of the temperature of

the entire machine in the energy saving phase (only if
set)
GR.1 XXX
Technical manual