22.16 Setting The Language; 23.17 Delivery Check - Wega Concept Use And Maintenance Manual

22.16 Setting the language

To set the displayed language, proceed as follows:
ENTER
Hold down the ENTER button for at least 5 seconds.
(x 5 secs.)

Scroll the menu until the item is highlighted
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS
ENTER Confi rm to access the menu
LANGUAGE
ENGLISH
< EXIT AND 'OK' TO CONFIRM

Select the language to use
ENTER Confi rm to exit the menu.

To exit without changes.
By confi rming the new language, the machine will
delete the previous language; once done, the machine
will load the new language.
Afterwards, the machine will restart.
When it's on again, the displayed text will be in the
last language selected.
It is possible to choose one of the following
languages:
• Italian
• English °C
• English °F
• French
• German
• Spanish
• Portuguese
i
If the operation fails, it will be necessary to
manually turn the machine off and back on, while
the USB drive is inserted.
Technical manual

23.17 Delivery check

To set the type of delivery check, proceed as
follows:
ENTER
Hold down the ENTER button for at least 5 seconds.
(x 5 secs.)

Scroll the menu until the item is highlighted
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS
ENTER Confi rm to access the menu
DELIVERY TEST
XXXX
Modify the setting.:

NO / TIMER / FLOW / TEMPERATURES
ENTER Confi rm to exit the menu.
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS

To exit the programming menu
NO:
By setting "NO", the machine doesn't perform any
control during delivery time.
TIMER MODE:
During the delivery, time scanning (10 seconds) is
displayed for each group.
At the end of the selections the time count stops and
is displayed for 10 seconds.
GR1, GR2, GR3, GR4 = time of delivery
expressed in seconds.
Wegaconcept
1,2 Bar Press 3,5
08:30 20-MAY-2010
TIME GR1 GR2 GR3 GR4
XX-XX-XX XX
47