Setting The Number Of Active Groups; 23.20 Loading The Default Data; Water Meter; Viewing Of The Litres Of Water Used - Wega Concept Use And Maintenance Manual

23.19 Setting the number of active
groups
To set the number of active groups, proceed as
follows:
ENTER
Hold down the ENTER button for at least 5 seconds.
(x 5 secs.)

Scroll the menu until the item is highlighted
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS
ENTER Confi rm to access the menu
GROUPS NUMBER
ENTER Confi rm to exit the menu.
13 NEW PROGRAM
14 DELIVERY TEST
15 GROUP WASHING
16 NUMBER OF GROUPS

To exit the programming menu

23.20 Loading the default data

To load the default data, proceed as follows:
• insert the USB drive in the
programming reader (7);
• turn on the machine by
pressing keys (1), (2), (3) on
the left keyboard.
1 2 3
Technical manual
X
24

Water meter

24.1

Viewing of the litres of water used

To view the litres of water used, proceed as follows:
• insert the USB drive in the
programming reader (7);
• hold down the (
for at least 5 seconds.
• the litres of water used (on
the left) and the quality of
the water set for the next
regeneration (on the right)
will be displayed.
REGENER. SOFTENER
000100
Amount of water used
24.2

Resetting the litres of water used

• proceed as indicated in the previous paragraph
• hold down the (
of water used is reset.
7
REGENER. SOFTENER
000000
Wegaconcept
) button
001500
Amount of water set in
litres
) key for 10 seconds, until the litres
001500
7
49