Manual Dispensing Of Hot Water; Automatic Dispensing Hot Water - Wega Atlas 2010 Use And Maintenance Manual, Instructions For The User

Manual dispensing of hot water

6.9
• Place the jug under the hot water
spout;
• rotate the tap knob clockwise;
ROSSO
C:0 M:100 Y:100 K:0
NERO
C:0 M:0 Y:0 K:100
VERDE
C:100 M:0 Y:100 K:0
• the dispensing of hot water will
be proportional to the opening
of the tap;
• to complete the dispensing,
rotate the tap knob clockwise.
Avoid contact with the hot water nozzle, do
not direct your hands or other body parts
towards the hot water nozzle ends.
52 216
of

Automatic dispensing hot water

6.10
PROGRAMMING
The machine is programmed
by default. Should the doses
need to be modified, proceed
as follows:
• Move the programming
lever X (see note *) located
under the body RH front
panel, to the ON position;
• position the jug under the hot
water spout;
• press the key for at least 5
seconds until all dose key LED are
on;
• press the hot water dispensing
button (Y);
• to confirm the dose press but-
ton ;
• on concluding the program-
ming, return the programming
lever X (see note*) to the OFF
position.
*
NOTE ( )
• In some models the program-
ming lever X is not fitted; to enter
the programming mode, press
button for at least 5 seconds,
with all push-button panel leds
switching on. To confirm the dose
press .
• In other models, to access
programming it is necessary
to use a special key switch.
• To exit programming it is suf-
ficient to wait a few seconds.
Y X
Y
USER manual