Hyundai H-1 2003 Owner's Manual page 99

D020B01P-GAT
How to lock and unlock the steering How to lock and unlock the steering How to lock and unlock the steering
How to lock and unlock the steering How to lock and unlock the steering
wheel wheel wheel wheel wheel
TO LOCK TO LOCK TO LOCK
TO LOCK TO LOCK
Remove the key at the "LOCK" position.
Slightly turn the steering wheel until it is locked.
TO UNLOCK TO UNLOCK TO UNLOCK TO UNLOCK TO UNLOCK
Turn the key to the "ACC" position while mov-
ing the steering wheel slightly.
CAUTION: CAUTION: CAUTION: CAUTION: CAUTION:
If the key is accidentally removed, the steer- If the key is accidentally removed, the steer- If the key is accidentally removed, the steer- If the key is accidentally removed, the steer- If the key is accidentally removed, the steer-
ing wheel will lock making it impossible to ing wheel will lock making it impossible to
ing wheel will lock making it impossible to ing wheel will lock making it impossible to ing wheel will lock making it impossible to
control the vehicle. control the vehicle. control the vehicle.
control the vehicle. control the vehicle.
3-2
STARTING & OPERATING STARTING & OPERATING STARTING & OPERATING
STARTING & OPERATING STARTING & OPERATING
D030A02P-GAT
STARTING THE ENGINE STARTING THE ENGINE STARTING THE ENGINE
STARTING THE ENGINE STARTING THE ENGINE
GT30020A
1. Apply the parking brake.
2. If your Hyundai is equipped with a manual
transmission, place the shift lever in neutral
and depress the clutch pedal fully. If your
Hyundai has an automatic transmission,
place the shift lever in "P" (park).
Amber lamp ON
3. On vehicles equipped with the diesel pre-
D030A01P-1
heat indication lamp, turn the ignition key to
the "ON" position. The diesel-preheat indi-
cation lamp will first illuminate in amber, and
then after a short time, the amber illumina-
tion will go off, indicating that preheating is
completed.
NOTE: NOTE: NOTE:
NOTE: NOTE:
If the engine were not started 10 seconds If the engine were not started 10 seconds
If the engine were not started 10 seconds If the engine were not started 10 seconds If the engine were not started 10 seconds
after the preheating is completed, turn the after the preheating is completed, turn the after the preheating is completed, turn the
after the preheating is completed, turn the after the preheating is completed, turn the
ignition key once more to the "LOCK" posi- ignition key once more to the "LOCK" posi- ignition key once more to the "LOCK" posi- ignition key once more to the "LOCK" posi- ignition key once more to the "LOCK" posi-
tion, and then to the "ON" position, in order tion, and then to the "ON" position, in order tion, and then to the "ON" position, in order tion, and then to the "ON" position, in order tion, and then to the "ON" position, in order
to preheat again. to preheat again. to preheat again. to preheat again. to preheat again.
D030A02P-GAG
Amber lamp OFF
C050B01HP