Hyundai H-1 2003 Owner's Manual page 120

3. Disconnect the steel wire from the tire sup-
port hook after the spare tire comes down
completely.
4. To install the spare tire, build the spare tire
as following.
rear wheel tire
wheel carrier guide
tire support
front wheel tire
steel wire
hook
tire support
5. Connect the steel wire with the support
hook.
IN CASE OF EMERGENCY IN CASE OF EMERGENCY IN CASE OF EMERGENCY
IN CASE OF EMERGENCY IN CASE OF EMERGENCY
6. Insert the spare wheel carrier wrench into
the hole in the spare tire carrier then turn the
wheel nut wrench clockwise.
7. After the spare tire fully raised, tighten by
E050C03P
hand to about 30 kg
Then, remove the spare wheel carrier wrench
with care not to turn it in the reverse direc-
tion. Now, ensure that the tire is secured in
position.
CAUTION: CAUTION:
CAUTION: CAUTION: CAUTION:
If you cannot secure the spare tire in posi- If you cannot secure the spare tire in posi- If you cannot secure the spare tire in posi- If you cannot secure the spare tire in posi- If you cannot secure the spare tire in posi-
tion, load it on the cargo deck and ask your tion, load it on the cargo deck and ask your
tion, load it on the cargo deck and ask your tion, load it on the cargo deck and ask your tion, load it on the cargo deck and ask your
nearest service shop for inspection. nearest service shop for inspection.
nearest service shop for inspection. nearest service shop for inspection. nearest service shop for inspection.
E050C05P
E050D01P-GAT
SPARE TIRE ANTI-THEFT DEVICE SPARE TIRE ANTI-THEFT DEVICE SPARE TIRE ANTI-THEFT DEVICE
SPARE TIRE ANTI-THEFT DEVICE SPARE TIRE ANTI-THEFT DEVICE
(If installed) (If installed) (If installed) (If installed) (If installed)
E050C04P
This device is designed to protect the spare tire
f (295 N).
•
theft.
After fitting the latch plate hole in spare wheel
carrier mounting bracket with a spare wheel
carrier wrench, lock with a key bought person-
ally.
Latch plate
Spare wheel
carrier mount-
ing bracket
FFT903C
4-5