Hyundai H-1 2003 Owner's Manual page 94

B890A01P-AAT
AUDIO FAULT CODE AUDIO FAULT CODE AUDIO FAULT CODE
AUDIO FAULT CODE AUDIO FAULT CODE
If you see any error indication in the display while using the CD or Tape mode, find the cause in the chart below. If you cannot clear the error indication,
take the car to your Hyundai dealer.
INDICATION
Er2 CDP DECK MECHANICAL ERROR
(EJECT ERROR, LOADING ERROR)
Er3 FOCUS ERROR
DATA READ ERROR
Er6 DISC ERROR
TAPE DECK ERROR
Er8
TAPE EJECT ERROR
HHH TEMPERATURE IS TOO HIGH
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
CAUSE SOLUTION
After resetting the audio, push the eject button.
If disc is not ejected, consult your hyundai dealer.
Make sure the disc is not scratched or damaged.
Press the eject button and pull out the disc. Then insert a normal CD disc.
Check if the disc is inserted correctly in the CD player. Make sure the disc is
not scratched or damaged.
After resetting the audio, push the eject button.
If tape is not ejected, consult your hyundai dealer.
Fault code will reset automatically when the temperature returns to
normal.
2-55