Hyundai H-1 2003 Owner's Manual page 81

H260B02E-AAT
1. 1. 1. 1. 1. POWER ON-OFF Control Knob POWER ON-OFF Control Knob POWER ON-OFF Control Knob POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position. Press
the knob to switch the power on. The LCD
shows the radio frequency in the radio mode or
the CD track indicator in either the CD mode or
CD AUTO CHANGER mode. To switch the
power off, press the knob again.
VOLUME Control VOLUME Control VOLUME Control VOLUME Control VOLUME Control
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise to
reduce the volume.
BALANCE Control BALANCE Control
BALANCE Control BALANCE Control BALANCE Control
Pull and turn the control knob clockwise to
emphasize right speaker sound (Left speaker
sound will be attenuated). When the control
knob is turned counterclockwise, left speaker
sound will be emphasized. (Right speaker sound
will be attenuated)
2. FAD (Fader Control) Knob 2. FAD (Fader Control) Knob 2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob 2. FAD (Fader Control) Knob
Turn the control knob counterclockwise to em-
phasize front speaker sound. (Rear speaker
sound will be attenuated) When the control
knob is turned clockwise, rear speaker sound
will be emphasized. (Front speaker sound will
be attenuated)
2-42
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
3. 3. 3. 3. 3. BASS Control Knob BASS Control Knob BASS Control Knob
BASS Control Knob BASS Control Knob
Press to pop the knob out and turn to the left or
right for the desired bass tone.
TREB (Treble Control) Knob TREB (Treble Control) Knob TREB (Treble Control) Knob TREB (Treble Control) Knob TREB (Treble Control) Knob
Pull the bass control knob further out. Turn to
the left or right for the desired treble tone.
4. 4. 4. 4. 4. SCAN Button SCAN Button SCAN Button
SCAN Button SCAN Button
When the scan button is pressed, the fre-
quency will increase and the receivable sta-
tions will be tuned in one after another, receiv-
ing each station for 5 seconds. To stop scan-
ning, press the scan button again.
5. TUNE (Manual) Select Button 5. TUNE (Manual) Select Button 5. TUNE (Manual) Select Button 5. TUNE (Manual) Select Button 5. TUNE (Manual) Select Button
Press the ( ) side or ( ) side to increase or to
decrease the frequency. Press either button
and hold down to continuously scroll. Release
button once the desired station is reached.
SEEK Operation (Automatic Channel SEEK Operation (Automatic Channel SEEK Operation (Automatic Channel SEEK Operation (Automatic Channel SEEK Operation (Automatic Channel
Selection) Selection) Selection) Selection) Selection)
Press the TUNE select button for 0.5 sec or
more, and releasing will automatically tune the
next available station with beep sound.
When the ( ) side is pressed longer than 0.5
second and releasing will automatically tune
the next higher frequency and when the (
side is pressed longer than 0.5 second and
releasing will automatically tune the next lower
frequency.
6. BAND Selector 6. BAND Selector
6. BAND Selector 6. BAND Selector 6. BAND Selector
Pressing the button changes the AM, FM1
FM/AM
and FM2 bands. The mode selected is dis-
played on LCD.
7. PRESET STATION SELECT Button 7. PRESET STATION SELECT Button 7. PRESET STATION SELECT Button 7. PRESET STATION SELECT Button 7. PRESET STATION SELECT Button
Six (6) stations for AM, FM or FM2 respectively
can be preset in the electronic memory circuit
on this unit.
HOW TO PRESET STATIONS HOW TO PRESET STATIONS HOW TO PRESET STATIONS HOW TO PRESET STATIONS HOW TO PRESET STATIONS
Six AM and twelve FM stations may be pro-
grammed into the memory of the radio. Then,
by simply pressing the band select button and/
or one of the six station select buttons, you may
recall any of these stations instantly. To pro-
gram the stations, follow these steps:
o Press band selector to set the band for AM,
FM or FM2.
o Select the desired station to be stored by
seek, scan or manual tuning.
o Determine the preset station select button
you wish to use to access that station.
o Press the station select button for more than
two seconds. A select button indicator will
show in the display indicating which select
button you have depressed. The frequency
display will flash after it has been stored into
)
the memory.