Table of Contents
Advertisement
only/ Except E.C 3 times). To turn off the
system, unlock the door or tail gate with the
transmitter.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Avoid trying to start the engine while the
Avoid trying to start the engine while the
Avoid trying to start the engine while the
Avoid trying to start the engine while the
Avoid trying to start the engine while the
system is armed.
system is armed.
system is armed.
system is armed.
system is armed.
B070D02O-AAT
Disarmed Stage
Disarmed Stage
Disarmed Stage
Disarmed Stage
Disarmed Stage
The system will be disarmed when the driver's
or passenger's door is unlocked by depressing
the "UNLOCK" button on the transmitter.
After completion of the step above, the turn
signal light will blink twice to indicate that the
system is disarmed.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
Once the system has been disarmed, it can
Once the system has been disarmed, it can
Once the system has been disarmed, it can
Once the system has been disarmed, it can
Once the system has been disarmed, it can
not be rearmed except by repeating the
not be rearmed except by repeating the
not be rearmed except by repeating the
not be rearmed except by repeating the
not be rearmed except by repeating the
arming procedures.
arming procedures.
arming procedures.
arming procedures.
arming procedures.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Only the transmitter can disarm the armed
Only the transmitter can disarm the armed
Only the transmitter can disarm the armed
Only the transmitter can disarm the armed
Only the transmitter can disarm the armed
stage. If the transmitter does not disarm the
stage. If the transmitter does not disarm the
stage. If the transmitter does not disarm the
stage. If the transmitter does not disarm the
stage. If the transmitter does not disarm the
system, it is necessary to take the following
system, it is necessary to take the following
system, it is necessary to take the following
system, it is necessary to take the following
system, it is necessary to take the following
steps;
steps;
steps;
steps;
steps;
1. 1. 1. 1. 1. Unlock the door with the key, which will
Unlock the door with the key, which will
Unlock the door with the key, which will
Unlock the door with the key, which will
Unlock the door with the key, which will
cause, the alarm to be activated.
cause, the alarm to be activated.
cause, the alarm to be activated.
cause, the alarm to be activated.
cause, the alarm to be activated.
2. 2. 2. 2. 2. Insert the key in the ignition key cylinder
Insert the key in the ignition key cylinder
Insert the key in the ignition key cylinder
Insert the key in the ignition key cylinder
Insert the key in the ignition key cylinder
and turn the ignition key to "ON" posi-
and turn the ignition key to "ON" posi-
and turn the ignition key to "ON" posi-
and turn the ignition key to "ON" posi-
and turn the ignition key to "ON" posi-
tion.
tion.
tion.
tion.
tion.
BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE
3. 3. 3. 3. 3. Wait for 30 seconds.
Wait for 30 seconds.
Wait for 30 seconds.
Wait for 30 seconds.
Wait for 30 seconds.
After completing the steps above, the sys-
After completing the steps above, the sys-
After completing the steps above, the sys-
After completing the steps above, the sys-
After completing the steps above, the sys-
tem will be disarmed.
tem will be disarmed.
tem will be disarmed.
tem will be disarmed.
tem will be disarmed.
B070F01A-GAT
Keyless Entry System (If installed)
Keyless Entry System (If installed)
Keyless Entry System (If installed)
Keyless Entry System (If installed)
Keyless Entry System (If installed)
Locking doors
Locking doors
Locking doors
Locking doors
Locking doors
1. Close all doors.
2. Push the "LOCK" button on the transmitter.
3. At the same time all doors lock, the turn
signal lamp will blink once to indicate that
the system is armed.
Unlocking doors
Unlocking doors
Unlocking doors
Unlocking doors
Unlocking doors
1. Push the "UNLOCK" button on the transmit-
ter.
2. At the same time all doors unlock, the turn
signal lamp will blink twice to indicate that
the system is disarmed.
B070E02HP-GAT
Replacing the battery
Replacing the battery
Replacing the battery
Replacing the battery
Replacing the battery
When the transmitter's battery begins to get
weak, it may take several pushes on the button
to lock or unlock the doors, and the LED will not
light. Replace the battery as soon as possible.
Battery type : CR2032
Replacement instructions:
1. Separate the case with a phillips screw-
driver.
2. Remove the old battery from the case and
note the polarity. Make sure the polarity of
the new battery is the same(+side facing
down), then insert it in the transmitter.
B070E01P
B070E02P
1-11
Hide quick links:
Advertisement
Table of Contents
