Hyundai H-1 2003 Owner's Manual page 119

E050A01P-GAT
SPARE WHEEL (If installed) SPARE WHEEL (If installed) SPARE WHEEL (If installed)
SPARE WHEEL (If installed) SPARE WHEEL (If installed)
Check the air pressure of the spare tire fre-
quently and make sure it is ready for emer-
gency use at any time.
Maintaining the spare wheel at the highest
specified air pressure will ensure that it can
always be used under any conditions (city/-
high-speed driving, varying load weight, etc.).
The spare wheel is stored under the floor of the
cargo space.
To remove the spare wheel, follow the proce-
dures described below.
1. Use the wheel nut wrench to loosen the
holder mounting bolt.
2. Lift up the hanger and separate it from the
holder, and then lower the hanger and re-
move the spare tire.
4-4
IN CASE OF EMERGENCY IN CASE OF EMERGENCY IN CASE OF EMERGENCY
IN CASE OF EMERGENCY IN CASE OF EMERGENCY
E050B01P-GAT
To reinstall the spare tire To reinstall the spare tire To reinstall the spare tire
To reinstall the spare tire To reinstall the spare tire
E050A02P
1. Set the spare tire on the center of the hanger.
2. Raise the hanger and hook it onto the holder.
CAUTION: CAUTION: CAUTION: CAUTION: CAUTION:
The spare wheel should always be securely The spare wheel should always be securely The spare wheel should always be securely The spare wheel should always be securely The spare wheel should always be securely
in position. in position. in position. in position. in position.
If a flat tire is changed, put the flat tire in the If a flat tire is changed, put the flat tire in the If a flat tire is changed, put the flat tire in the If a flat tire is changed, put the flat tire in the If a flat tire is changed, put the flat tire in the
spare wheel mounting position, and use the spare wheel mounting position, and use the
spare wheel mounting position, and use the spare wheel mounting position, and use the spare wheel mounting position, and use the
wheel nut wrench to secure it firmly. wheel nut wrench to secure it firmly. wheel nut wrench to secure it firmly.
wheel nut wrench to secure it firmly. wheel nut wrench to secure it firmly.
E050C01P-GAT
SPARE WHEEL (TRUCK) SPARE WHEEL (TRUCK) SPARE WHEEL (TRUCK)
SPARE WHEEL (TRUCK) SPARE WHEEL (TRUCK)
E050B02P
1. Connect the spare wheel carrier wrench
with the wheel nut wrench.
2. Insert the spare wheel carrier wrench into
the hole in the spare tire carrier then turn the
wheel nut wrench counterclockwise, and the
spare tire comes down.
hook
tire support
E050C01P
steel wire
E050C02P