Hyundai H-1 2003 Owner's Manual page 66

C680A01P-GAT
AIR CONDITIONER OPERATION AIR CONDITIONER OPERATION AIR CONDITIONER OPERATION AIR CONDITIONER OPERATION AIR CONDITIONER OPERATION
(If installed) (If installed)
(If installed) (If installed) (If installed)
Cooling Cooling Cooling Cooling Cooling
To use the air conditioner to cool interior:
o Set the side vent control to "OFF", to shut
off outside air entry.
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
o Turn on the fan control switch.
o Turn on the air conditioner switch by push-
ing in on the switch. The air conditioner
indicator light should come on at the same
time.
o Set the air intake control to the "Fresh"
position.
o Set the temperature control to the "Cool"
position.
("Cool" provides maximum cooling. The tem-
perature may be moderated by moving the
control toward "Warm".)
o Adjust the fan control to the desired speed.
For greater cooling, turn the fan control to
one of the higher speeds or temporarily
C680A01P-GAG
select the "Recirc" position on the air intake
control.
C690A01P-GAT
Dehumidified heating Dehumidified heating Dehumidified heating Dehumidified heating Dehumidified heating
C680A02P-GAG
For dehumidified heating:
o Turn on the fan control switch.
o Turn on the air conditioner switch by pushing
in on the switch. The air conditioner indicator
light should come on at the same time.
o Set the air intake control to "Fresh".
o Set the air flow control to "Face".
o Adjust the fan control to the desired speed.
For more rapid action, set the fan at one of
the higher speeds.
o Adjust the temperature control to provide the
desired amount of warmth.
C690A01P-GAG
C690A02P-GAG
2-27