Hyundai H-1 2003 Owner's Manual page 147

G080J01P-GAT
o o o o o Engine coolant Engine coolant Engine coolant Engine coolant
Engine coolant
The coolant should be changed at those inter-
vals specified in the Vehicle Maintenance Re-
quirements Section.
G080K01P-GAT
o o o o o Timing belt Timing belt Timing belt Timing belt Timing belt
Inspect all parts related with the timing belt for
damage and deformation. Replace any dam-
aged parts.
G080L01P-GAT
o o o o o Manual transmission oil Manual transmission oil Manual transmission oil Manual transmission oil Manual transmission oil
Check manual transaxle oil according to the
maintenance schedule.
NOTE: NOTE:
NOTE: NOTE: NOTE:
If the oil level is low, check for possible If the oil level is low, check for possible If the oil level is low, check for possible If the oil level is low, check for possible If the oil level is low, check for possible
leaks before adding oil. Do not overfill. leaks before adding oil. Do not overfill.
leaks before adding oil. Do not overfill. leaks before adding oil. Do not overfill. leaks before adding oil. Do not overfill.
G080M02P-GAT
o o o o o Automatic transmission fluid Automatic transmission fluid Automatic transmission fluid Automatic transmission fluid
Automatic transmission fluid
The fluid level should be in the "HOT" range of
the dipstick, after engine and transaxle are at
normal operating temperature. Check the Auto-
matic Transaxle Fluid level with the engine
running and the transaxle in neutral, with the
parking brake properly applied. Use GENUINE
HYUNDAI ATF AUTOMATIC TRANSMISSION
FLUID, DIAMOND ATF DEXRON I I or DIA-
MOND ATF SP I when adding or changing
fluid.
6-10
PREVENTIVE PREVENTIVE PREVENTIVE MAINTENANCE MAINTENANCE MAINTENANCE
PREVENTIVE PREVENTIVE MAINTENANCE MAINTENANCE
G080N01P-GAT
o o o o o Brake hoses and lines Brake hoses and lines Brake hoses and lines Brake hoses and lines
Brake hoses and lines
Visually check for proper installation, chafing,
cracks, deterioration and any leakage. Replace
any deteriorated or damaged parts immedi-
ately.
G080O01P-GAT
o o o o o Brake fluid Brake fluid Brake fluid
Brake fluid Brake fluid
Check brake fluid level in the brake fluid reser-
voir. The level should be between "MIN" and
"MAX" marks on the side of the reservoir. Use
only hydraulic brake fluid conforming SAE
J1703.
G080P01P-GAT
o o o o o Rear brake drums and linings Rear brake drums and linings Rear brake drums and linings
Rear brake drums and linings Rear brake drums and linings
Check for scoring, burning, leaking fluid, bro-
ken parts, and excessive wear.
G080Q01P-GAT
o o o o o Brake pads, calipers and rotors Brake pads, calipers and rotors Brake pads, calipers and rotors Brake pads, calipers and rotors Brake pads, calipers and rotors
Check the pads for excessive wear, discs for
run out and wear, and calipers for fluid leakage.
G080R01P-GAT
o o o o o Parking brake Parking brake Parking brake
Parking brake Parking brake
Inspect the parking brake system such as
parking brake lever, cables, and so on. For
detailed service procedures, refer to the Shop
Manual.
G080S01P-GAT
o o o o o Exhaust pipe connections, Exhaust pipe connections, Exhaust pipe connections, Exhaust pipe connections, Exhaust pipe connections,
muffler and suspension bolts muffler and suspension bolts
muffler and suspension bolts muffler and suspension bolts muffler and suspension bolts
Check the exhaust pipe, muffler, and suspen-
sion connections for looseness or damage.
G080T01P-GAT
o o o o o Steering gear box, linkage and boots Steering gear box, linkage and boots Steering gear box, linkage and boots Steering gear box, linkage and boots Steering gear box, linkage and boots
With the vehicle stopped and engine off, check
for excessive free-play in the steering wheel.
Check the linkage for bends or damage. Check
the dust boots and ball joints for deterioration,
cracks, or damage. Replace any damaged parts.
G080U01P-GAT
o o o o o Wheel bearing grease Wheel bearing grease Wheel bearing grease Wheel bearing grease Wheel bearing grease
Check the wheel bearings and grease accord-
ing to the maintenance schedule. For inspec-
tion procedures, see Shop Manual.