Table of Contents
Advertisement
Crestron C2N/C2NI-CB Series
The previous illustration shows three of many possible flush mount
configurations: two double-row switches with two single-row switches
(A); three double-row switches (B); and six single-row switches (C), all
with the LED indicators on the left. A UK-style configuration with three
double-row switches is also shown (D). The button caps are tapered and
are arranged here in a shingle style with the narrow part of the button cap
at the top. Each button cap can, however, be arranged in either
orientation, and the overall keypads can be installed with the LEDs on
the right. Spacers are flat and flush with the front of the bezel surface.
Button caps are laser-engravable using the Crestron Engraver software;
spacers are not. The engraving software provides up to three fields for
each button cap to allow for the left/right and center press functions,
permits multiple lines of text, and also allows you to specify the
orientation of each button cap. The Crestron Engraver software, Version
2.4 or later, is available from the Crestron website.
The following illustrations provide overall dimensions of the three
keypad styles.
Operations & Installation Guide - DOC. 6346A
Cameo
Cameo™ Keypads: C2N/C2NI-CB Series • 5
™
Keypads
Advertisement
Table of Contents
