Crestron C2N-CBD Operations & Installation Manual page 6

™
Cameo Keypads
The basic Cameo keypad colors are black, white, and almond. The
keypad's colors and finishes can be used to accent a home's colors, wall
coverings, or décor. Additional designer colors are available. (Contact a
Crestron customer service representative for details.)
Mounting options include a choice of installation as a standalone device
using Crestron's exclusive flush-mounting system; or, for the domestic
keypads, Decorator installation in a conventional gang-box using
standard Decora
mounting (electrical box optional). The flush-mounting system is the
ultimate low-profile appearance that results in a footprint that is up to
75% smaller than a standard Decora style faceplate, and blends into any
room effortlessly. Refer to Assembly and Installation procedures, which
start on page 12, for details.
Each Cameo keypad is supplied with six single-row button caps, three
double-row button caps, and two triple-row button caps as well as two
single-row spacers, one double-row spacer, and one triple-row spacer.
All switches on the keypad are functionally identical. White feedback
LEDs to the left of each row are independently addressable and indicate
which switches are active. The intensity of the feedback LEDs is
programmable from 0 to 100%. Button caps have white LED
backlighting that is programmable from 0 to 100% intensity as well. In
certain circumstances, such as when using black button caps, true
backlighting is not practical. Instead, the program can use the feedback
LEDs to perform a backlighting function, turning them all on but at a
fixed percentage of their active state intensity.
For programming details, refer to "Cameo Symbol in Programming
Manager," on page 27.
2 • Cameo™ Keypads: C2N/C2NI-CB Series
Crestron C2N/C2NI-CB Series
®
style faceplates; or for the UK-style models, traditional
Operations & Installation Guide - DOC. 6346A