Table of Contents
Advertisement
Crestron C2N/C2NI-CB Series
Crestron D3 Pro similarly offers automatic programming for lighting,
HVAC, and security.
Both Crestron SystemBuilder and D3 Pro are fully integrated with
Crestron's suite of software development tools, including SIMPL
Windows, VT Pro-e, and the Crestron Database. Both access these tools
behind the scenes, enabling you to easily create robust systems.
Programming with SIMPL Windows
NOTE: The following assumes that the reader has knowledge of SIMPL
Windows. If not, refer to the extensive help information provided with
the software.
NOTE: In the following description, the PRO2 control system is used.
SIMPL Windows is Crestron's software for programming Crestron
control systems. It provides a well-designed graphical environment with
a number of workspaces (i.e., windows) in which a programmer can
select, configure, program, test, and monitor a Crestron control system.
SIMPL Windows offers drag and drop functionality in a familiar
Windows
This section describes a sample SIMPL Windows program that includes a
Cameo keypad.
Configuration Manager is where programmers "build" a Crestron control
system by selecting hardware from the Device Library. In Configuration
Manager, drag the PRO2 from the Control Systems folder of the Device
Library and drop it in the upper pane of the System Views. The PRO2
with its associated communication ports is displayed in the System Views
upper pane.
PRO2 System View
The System Views lower pane displays the PRO2 system tree. This tree
can be expanded to display and configure the communications ports.
Operations & Installation Guide - DOC. 6346A
environment.
Cameo
Cameo™ Keypads: C2N/C2NI-CB Series • 25
™
Keypads
Advertisement
Table of Contents
