Table of Contents
Advertisement
9/99
Programming the Binary (Contact) Inputs
Up to 30 attributes can be selected for display on the Programmable Input Map. Use WinECP and follow these steps to
program the binary (contact) inputs on the Programmable Input Map screen:
1. From the WinECP Main Menu, select "Settings."
2. From the Settings Menu, select "Programmable I/O" and then "Programmable Inputs."
3. The Programmable Input Map screen appears.
4. To change the listing of logical inputs:
a. Place the mouse arrow on the logical input (leftmost column).
b. Click to display a list of possible logical inputs.
c. Scroll through the list until the logical input you want is highlighted.
d. Click OK to change the contact or click cancel to close the list window without changing
the current logical input.
5. To change the logic of a logical input:
a. Click the logic value of a logical input and it will change.
b. Click OK to change or cancel to close the logic window without any changes.
6. To change the conditions of a logical input:
a. Place the mouse arrow on the box across from the contact name and underneath the physical
input you want.
b. Click the box to change color for gray, red or white for deassigned, closed and open logic. Gray, red or
white is the same as blank, "C" or "O" logic in DOS ECP.
c. Click OK to change or cancel to close the status window without any changes.
7. To assign a name to an input:
a. Click mouse arrow in field above physical input designation.
b. Click OK to change or cancel to close the input window without any changes.
8. Save your changes.
a. Return to "Settings Menu".
b. Choose "Select All" to save all settings,or "Programmable I/O" to save I/O settings only.
c. Choose "Download To System" to save change in DPU1500R or "Save To File" to save in a file.
Programmable Input and Output Contacts
ABB Distribution Protection Unit 1500R
website:www.abb.com/papd
6-5
Advertisement
Table of Contents
