Table of Contents
Advertisement
ABB Distribution Protection Unit 1500R
9/99
Windows External Communications Program
Use a 9-pin null modem adaptor with a 9-pin RS-232 cable when you connect a PC directly to the DPU1500R (not via
modems). When connecting to a modem, simply use a 25-pin to 9-pin RS-232 cable.
The application program on this disk has been carefully tested and performs accurately with most IBM-compatible
personal computers. If you experience difficulty in using WinECP, use its online helper or contact ABB at (610)395-
7333.
WinECP Menus
Below is an outline of all the menus available through the Windows External Communications Program. Many of these
menus are the same as those in the man-machine interface (MMI), but some are unique to the WinECP. Tables 5–1
through 5-5 show the specific settings for the DPU1500R.
Figure 5-4. WinECP Program
website:www.abb.com/papd
Interfacing with the Relay
5-4
Advertisement
Table of Contents
