ABB DPU 1500R Instruction Book page 61

9/99
Create Catalog Number
After selecting a relay type and choosing "Create Catalog Number", the following screen appears: (Figure 4) From this
screen, you can build the product's catalog number via the editable fields. (NOTE: For additional information regarding
catalog numbers, refer to the Ordering Selections page in the Instruction Manual or Descriptive Bulletin.) The Catalog
Number can be changed by manually inputting the individual numbers, or by using the drop-down arrow in each field and
making the desired selection.
When you have completed your selections in the Create Catalog Number screen, click OK.
Advanced (Version Number)
By clicking the Advanced button in the Create Catalog Number screen, you can select the firmware version number of the
relay. Use the drop down arrow that appears in the "Version" window (Figure 5) to choose from a list of Firmware Version
Numbers available for the relay type that you have selected. When you have finished making your selection, click OK.
Direct Access
If you wish to connect directly to the relay, select "Direct Access" at the Select Operating Mode dialog (See Figure 2).
Make the appropriate selections from the Comm Port Setup dialog that is displayed and then click Connect.
Interfacing with the Relay
ABB Distribution Protection Unit 1500R
Figure 4
Figure 5
website:www.abb.com/papd
5-7