ABB DPU 1500R Instruction Book page 64

ABB Distribution Protection Unit 1500R
Status Bar
The Status Bar appears at the bottom of the main WinECP window. It contains the following information regarding the
current connection status to the relay:
1. Help Instructions
NOTE: Full Help capability is still under development and is not included with the WinECP Release 1.00.
2. Connection Type
a. Online
b. Offline
3. Catalog Number
4. Serial Number
5. Unit Number
6. Unit Name
7. Firmware Version Number (CPU #)
FILE
From the File menu, you can choose to start a New Session, Import or Export data, open other ABB applications
(Oscillographics Analysis Tool or FPI) or Exit the WinECP application.
New Session
1. Click File, New Session.
2. At the prompt, choose Yes to save your current settings to a file on your hard drive, or click No to continue to a new
session without saving your current settings. Choose Cancel if you wish to cancel beginning a new session.
Export
1. Select File, Export.
2. Select the data you wish to save to a file.
a. Load Profile - When the Save As dialog appears, choose the location where you would like to have the file
stored. Assign a name to the file and click Save.
b. Load Profile All - When the Save As dialog appears, choose the location where you would like to save the file
on the computer. Assign a name to the file and click Save.
c. Oscillographics - When the Waveform Capture Records dialog appears, select the record number you wish to
save and click Save to File. When the Save As dialog appears, choose the location where you like to have the
file stored.
NOTE: When exporting Oscillographics, the file name is already designated according to the Record Number you
choose to save. You can change the default file name by typing in a new name.
5-10
Figure 10
website:www.abb.com/papd
9/99
Interfacing with the Relay