ABB DPU 1500R Instruction Book page 161

ABB Distribution Protection Unit 1500R
The table below illustrates all possible hardware configurations for the communication ports and the supported protocols.
The Catalog Number Select Option columns list every communication option for which the relays can be configured.
The different protocol variations are outlined under the corresponding communication ports that support them. Select
the row containing the protocol combination that best suits your communications requirements and use the corresponding
catalog number options to fill in the brackets [ ] of the catalog number.
The auxiliary port labelled IRIG-B receives a demodulated IRIG-B signal for 1500R clock synchronization purposes.
For example, if your system requires DNP 3.0 (IEC870-5) protocol, the ordering catalog number would be 577R041[2]-
6101[1] (4th row), or 577R041[4]-6101[1](10th row) based on your choice for the second port provided.
Catalog Number
Select Option
577R041[ ] - 6101[ ]
0
0
0
1
1
2
2 4
3 0
4
1
4 4
5
0
website:www.abb.com/papd
12-10
COM 2
COM 1
NON
NON
ISOLATED
ISOLATED
RS-232
RS-232
With
Without
Display
Display*
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
ABB Ten Byte
Select Communication Options Table
An empty selection box indicates communication port is either not provided or is disabled.
Ordering Information/Communications/Panel Mounting/Spare Parts
REAR PORT ASSIGNMENTS
COM 3
55 57
AUX.
PORTS
56
ISOL A T ED
RS-485
RS-232
ISOLATED
unless
noted
ABB Ten Byte
DNP 3.0
ABB Ten Byte
ABB Ten Byte
DNP 3.0
®
Modbus
ABB Ten Byte
®
ABB Ten Byte Modbus
or ABB Ten Byte
DNP 3.0
Modbus
ABB Ten Byte
ABB Ten Byte
* Main board jumper selectable front or rear.
63
61
59
58 60
62
IN COM IRI G- B
ISOLATED
IRIG-B
INCOM IRIG-B
INCOM
®
INCOM
IRIG-B
9/99
64