Resets; Figure 8-9 Target Reset; Figure 8-10 Seal-In Alarm Reset - ABB DPU 1500R Instruction Book

9/99 ABB Distribution Protection Unit 1500R

Resets

Certain registers can be reset with WinECP. Targets, Sealed In Alarms, and Min/Max Demand registers can all be reset
through the Control-Reset Menu (see Figure 8-9). The Sealed In Alarms can be selectively reset, or can be reset all at
once by choosing "De-energize All" (see Figure 8-10). Targets, alarms, and seal-in alarms can also be reset through the
front-panel MMI. See page 5-1 in Section 5 for details.
Figure 8-9. Target Reset
Figure 8-10. Seal-In Alarm Reset
website:www.abb.com/papd
Monitoring andControl
8-5