Table of Contents
Advertisement
ABB Distribution Protection Unit 1500R
9/99
Print
To Print data, click Select All from the main Settings tabbed sheet or select only the checkboxes of those settings you
wish to print.
Click Print and follow the instructions in the Print dialog window to select your printer, number of copies, etc.
NOTE: You can choose to Download, Upload, Save, Read or Print directly from a Settings tabbed sheet in which you are
currently working, in which case only that sheet will be affected.
View/Make Changes to Individual Settings Sheets
1. Click Settings on the menu bar.
2. When the Settings screen appears, click the Primary (or other) tabbed sheet.
3. Note that the Primary sheet now opens and from there you can select from the categories contained on that sheet:
a. Overcurrent
b. Voltage
c. Recloser
d. Directional
e. Frequency
Figure 13
Follow the same guidelines for each tabbed sheet you wish to view, clicking on the appropriate "tab" to bring that sheet
to the forefront of the window.
To change data within each tabbed sheet settings category, click on the field whose data you wish to change. When the
pop-up window appears, click the arrow to either display a list of items or to change the numeric range of that particular
setting.
If the setting you wish to change is a numeric value, you can also enter the desired number by using the numeric keypad
on your keyboard.
NOTE: The numeric value you enter manually must fall within the allowable range for that setting. If you enter a value that
is outside of the specified range, you will receive a warning to that effect and will need to correct the value.
website:www.abb.com/papd
Interfacing with the Relay
5-14
Advertisement
Table of Contents
