FXCPU Structured Programming Manual
[Device & Common]
6.6
Parameter setting by GX Works2
This subsection explains the parameter setting procedures using GX Works2.
The screens explained here are provided for FX
Set items and their contents vary depending on the PLC. Refer to the following sections.
6.6.1
PLC Parameter setting
1
Opening the parameter setting screen
In the project view, double-click [Parameter]-[PLC Parameter].
284
/FX
PLCs.
3U
3UC
→ 6.3 Memory Capacity Setting Range
6 Types and Setting of Parameters
6.6 Parameter setting by GX Works2
→ 6.1 Parameter List
→ 6.2 Parameter Initial Values