Mitsubishi Electric MELSEC-Q Structured Programming Manual page 303

FXCPU Structured Programming Manual
[Device & Common]
6. Click "Initial Setting" in the "Setting Contents" column on the "Network Parameter - CC-Link
Module Configuration" dialog box.
Set item
Target Station No.
No. of Registered Procedures
Click the "Regist Procedure" button to display the "Remote Device Station Initial Setting Procedure
Registration" dialog box.
Set item
Input Format
Execute Flag
Operational Condition
Executional
Condition
Set the station number of the unit to be initialized.
Displays the number of procedures registered on the "Remote Device
Station Initial Setting Procedure Registration" dialog box.
Select the data input format and display format of "Write Data" when "Write
Device" in "Details of Execution" is set to "RWw".
Select whether or not the initial setting is to be actually executed.
Select whether the initial setting operation condition is to be set anew or
same as the previous condition.
Condition
Select the device used as the initial setting execution condition.
Device
Set the device number used as the initial setting execution condition.
• When "Condition Device" is set to "RX"
Remote Net (Ver.1 Mode): 00 to 7FH
Device No. Remote Net (Ver.2 Mode), Remote Net (Additional Mode): 00 to DFH
• When "Condition Device" is set to "SB"
Remote Net (Ver.1 Mode): 00 to FFH
Remote Net (Ver.2 Mode), Remote Net (Additional Mode): 00 to 1FFH
Execute
Select the initial setting execution condition.
Condition
Contents of setting
Contents of setting
6 Types and Setting of Parameters
6.6 Parameter setting by GX Works2
Setting range
FX /FX : 1 to 16
3U 3UC
FX /FX : 1 to 12
3G 3GC
-
Setting range
DEC, HEX
Execute,
Only Set
Set New,
Same as Prev. Set
RX, SB
As shown on the left
ON, OFF
1
2
3
4
5
6
7
301