Pulse Generator
The GO-5000M-USB-UV has a frequency divider using the pixel clock as the basic clock and a pulse
generator. In the Pulse Generator, various Clear settings are connected to GPIO.
The following shows the Pulse Generator default settings.
Pulse Generator default settings
Clock Pre-scaler
Clock pre-scaler (Divide Value) can set the dividing value of the frequency divider (12-bit
length) and the pixel clock is used for this. In the GO-5000M-USB-UV, the pixel clock is set at 48
MHz.
Pulse Generator Selector
This is where you select a pulse generator. In the GO-5000M-USB-UV, it is fixed to Pulse
Generator 0.
Pulse Generator setting / Pulse Generator pulse construction
— 24 —
GO-5000M-USB-UV