Table of Contents
Advertisement
5.11
FAN (X16)
The Winbond 83627HG LPC-I/O Controller provides an internal hardware monitor and a FAN connection.
Note:
To support FAN control and monitoring it is required to set the LPC decode range 1 base to 290h and the
range 1 size to 8B in the module BIOS. Refer to the module's manual for more details.
Table 5 18: Pinning of X16
Connector: CON-MOLEX-53261-0371; Molex 53261-0371
Header
Notes:
1: Normally R106 is mounted for 12V fan, for 5V fan mount R105 0Ohm instead of R106
5.12
GPIO (X18)
The Winbond 83627HG LPC-I/O Controller provides 8 bit GPIO (Gamepad port)
Table 5 19: Pinning of X18
Connector: CON-MOLEX-53261-1071; Molex 53261-1071
Header
Notes:
1: not fused, max 100mA allowed
Warning:
These signals are not protected against overvoltage, overcurrent and ESD discharge.
These signals are directly connected to the LPC-I/O Controller.
Kontron User's Guide nanoETXexpress-HMI
Baseboard (ePDAnano)
PIN
Signal
1
FANIO1
2
FANPWM1
3
GND
PIN
Signal
1
GND
V5.0_S0
2
GP10
3
GP11
4
5
GP12
GP13
6
GP14
7
GP15
8
9
GP16
10
GP17
25
5 Connector and feature description
Function
Tacho Signal from Fan
PWM controlled Fan Power
Function
Note
1
Note
Advertisement
Table of Contents
