Table of Contents
Advertisement
Table 5-5:
Pinning
of X10
Connector: CON-MOLEX-53261-0471; Molex 53261-0471
Header
Refer to the module manual and download section of the used module for driver and software downloads
for using the USB Client functionality.
Warnin : Do not use the USB Client Port X10 for connecting any USB devices
g
Note:
The availability of the Express Card USB function (USB6) and USB Client (USB7) depends on the module's
specification. For the Express Card USB function a module with full USB support is necessary.
5.3
Ethernet (X3)
The Ethernet Port on ePDAnano is designed for Gigabit Ethernet modules. For modules with 10/100 MBit
Ethernet connections please
Table 5-6:
Pinning
of X10
Connector: CON-RJ45- 7499111441; Würth Elektronik 7499111441
Header
Table 5-7: X3 LED function
LED
1 (left)
2 (right)
Kontron User's Guide nanoETXexpress-HMI
Baseboard (ePDAnano)
P IN
Signal
1
NC
2
USB7_D+
3
USB7_D-
4
NC
5
GND
contact your local sales or support.
P IN
S ignal
1
MX0+
2
MX0-
3
MX1+
4
MX2+
5
MX2-
6
MX1-
7
MX3+
8
MX3-
L
Left LED
R
Right LED
State
Green
Yellow
Off
Green
Blinking
18
5 Connector and feature description
Function
Not connected
USB Client port D+
USB Client port D-
Not connected
Ground
Function
Yellow = Link100; Green = Link1000
Green = Activity
Function
Link1000
Link100
Link10
Activity
Note
Note
Link
Advertisement
Table of Contents
