Can (X14); Microsd Socket (X15) - Kontron nanoETXexpress-HMI Baseboard User Manual

5.9

CAN (X14)

Table 5-5: Pinning of X14
Connector: CON-MOLEX-53261-0471; Molex 53261-0471
Header
Notes: 1: Normally not connected, mount R22 0Ohm to power external logic with 5V, max 100mA recommended
Cable: KAB-CAN-1; 96065-0000-00-0
5.10

microSD Socket (X15)

COM Express™ defines a maximum of 4GPIs and 4 GPOs. With the new nanoETXexpress standard the 8
General Purpose Input/Output signals alternatively can be configured as SDIO interface. Refer to the
module's manual if SD Card feature is supported and how it is to be configured.
Table 5 17: Pinning of X15
Connector: CON-MICROSD-MOLEX-49225-0811; Molex 49225-0811
Header
Kontron User's Guide nanoETXexpress-HMI
Baseboard (ePDAnano)
PIN Signal
1 GND
2 NC
3 CAN_H
4 CAN_L
PIN Signal
1 DAT2
2 DAT3/CD
3 CMD
4 VDD
5 CLK
6 GND
7 DAT0
8 DAT1
9 CD-SW1
10 CD-SW2
24
5 Connector and feature description
Function
not connected
CAN high
CAN low
Function
SD_DATA2
SD_DATA3
SD_CMD
SD_CLK
SD_DATA0
SD_DATA1
SD_CD#
GND
Note
1
Note