Polaris PVCR 3300 IQ Home Aqua Operation Manual page 78

 Set a cleanup schedule, start, stop, or cancel vacuuming cycles
 Adjust vacuuming settings
 Trace the vacuuming progress
 Name your robot
 Get access to the appliance adjustment guidelines
 Find answers to FAQ
 Automatically update software
 Contact the support service.
The vacuum cleaner Wi-Fi network connection setup
Attention: Prior to connecting to Wi-Fi network, install the vacuum cleaner on the charge base in
avoidance of failure due to the battery discharge during setup.

Plug the charge base into a power network through the standard adapter.

Set the switch on the vacuum cleaner to the position I.

Put the vacuum cleaner on the floor, and direct it to the charge base by pushing button
control unit. If the appliance fails to switch on, install it on the charge base manually, or connect to it
the charge adapter.

Open application Polaris IQ Home in your mobile device.
Important! Always download a firmware update for the device if the application prompts you to do
so.
For phone with operating system Android:
New appliance configuration

The "Home" screen: click on "Add Appliance".

Select the vacuum cleaner (PVCR-3300) in the "All Appliances" list

Click on "Settings Access" to open the Wi-Fi settings on your phone

Connect your phone to Wi-Fi network coinciding with the vacuum cleaner name (PVCR-3300)

Return to the application

Then follow prompts in the next screen to pair the appliance:
1. Push and hold down button
indicator starts to flash quickly at acoustic signal disabled).
2. Then click on "Continue" in the application

Select from the list, or type in the name, and specify password of the W-i-Fi- network to which you
want to connect your appliance, then click on "Connect"

Wait until the configuration procedure completion.
Pairing a previously configured appliance:

The "Home" screen: click on "Add Appliance".

Select the vacuum cleaner (PVCR-3300) in the "On-line" list (if the appliance is absent, check
availability of the Wi-Fi network the appliance is configured for)

Then follow prompts in the next screen to pair the appliance:
1. Push and hold down button
quickly at acoustic signal disabled).
2. Then click on "Continue" in the application
on the appliance body until acoustic signal (or until the Wi-Fi
until acoustic signal (or until the Wi-Fi indicator starts to flash
78
on the