recommended to enter the new settings into a different settings group, and then change the "active
group" setting, thus ensuring that all new settings become valid simultaneously.
4.2.6.1
Setting Method
There are three setting methods as follows:
- To enter a selected item
- To enter a text string
- To enter numerical values
To enter a selected item
If a screen as shown below is displayed, perform setting as follows.
The cursor can be moved to upper or lower lines within the screen by pressing the
If setting (change) is not required, skip the line with the
/ 1
• P a s s w o r d
• D e s c r i p t i o n
• C o m m s
• R e c o r d
• S t a t u s
• P r o t e c t i o n
• B i n a r y
• B i n a r y
• L E D
• Move the cursor to a setting item.
• Press the ENTER key.
To enter a text string
Texts strings are entered under "Plant name" or "Description" screen.
/ 2
• P l a n t
• D e s c r i p t i o n
To select a character, use keys
" → " and " ← " on each of lines 4, 8 and 10 indicate a space and backspace, respectively. A
maximum of 22 characters can be entered.
_
S e t . ( c h a n g e )
I / P
O / P
D e s c r i p t i o n
n a m e
,
,
and
to move blinking cursor down, up, left and right.
A B C D E F G
H I J K L M N
O P Q R S T U
V W X Y Z ← →
a b c d e f g
h i j k l m n
o p q r s t u
v w x y z ← →
0 1 2 3 4 5 6
7 8 9
( ) [ ] @ _ {
} ∗ / + − < =
⎯
⎯
91
and
keys.
← →
6 F 2 S 0 8 2 8
and
keys.