Toshiba GRL150-100 Series Instruction Manual page 90

If a date which does not exist in the calendar is set and END is pressed, "**** Error ****" is
displayed on the top line and the adjustment is discarded. Return to the normal screen by pressing
the CANCEL key and adjust again.
4.2.4.6 LCD Contrast
To adjust the contrast of LCD screen, do the following:
• Select "Status" on the top "MENU" screen to display the "Status" screen.
• Select "LCD contrast" to display the setting screen.
• Press the
or
pressing the
4.2.5 Viewing the Settings
The sub-menu "Set.(view)" is used to view the settings made using the sub-menu "Set.(change)".
The following items are displayed:
Relay version
Description
Relay address and baud rate in the RSM (relay setting and monitoring system) or
IEC60870-5-103 communication
Record setting
Status setting
Protection setting
Binary input setting
Binary output setting
LED setting
Enter an item on the LCD to display each item as described in the previous sections.
4.2.5.1 Relay Version
To view the relay version, do the following.
• Press the "Set.(view)" on the main menu.
/ 2 L C D c o n t r a s t
key to adjust the contrast. The characters on the screen become thin by
key and deep by pressing the
/ 1 S e t . ( v i e w )
• V e r s i o n
• D e s c r i p t i o n
• C o m m s
• R e c o r d
• S t a t u s
• P r o t e c t i o n
• B i n a r y
• B i n a r y
• L E D
key.
I / P
O / P
⎯ ⎯
89
6 F 2 S 0 8 2 8