Toshiba GRL150-100 Series Instruction Manual page 89

Line differential relay
Table of Contents

Advertisement

CBF
A
Cold Ld
0
The status of each element is expressed with logical level "1" or "0". Status "1" means the element
is in operation.
4.2.4.4
Displaying the Status of the Time Synchronisation Source
The internal clock of the GRL150 can be synchronised with external clocks such as the binary
input signal clock, RSM (relay setting and monitoring system) clock or IEC60870-5-103. To
display on the LCD whether these clocks are active (=Act.) or inactive (=Inact.) and which clock
the relay is synchronised with, do the following:
• Select "Status" on the top "MENU" screen to display the "Status" screen.
• Select "Time sync." to display the status of time synchronisation sources.
/ 2
T i m e
∗ B I
:
R S M
:
I E C
:
I R I G :
The asterisk on the far left shows that the internal clock is synchronised with the marked source
clock. If the marked source clock is inactive, the internal clock runs locally.
Note: If the Binary input signal has not been detected for one hour or more after the last detection, the
status becomes "inactive".
For details of the setting time synchronisation, see Section 4.2.6.6.
4.2.4.5
Clock Adjustment
To adjust the clock when the internal clock is running locally, do the following:
• Select "Status" on the top "MENU" screen to display the "Status" screen.
• Select "Clock adjust." to display the setting screen.
/ 2
M i n u t e
H o u r
D a y
M o n t h
Y e a r
Line 1 and 2 show the current date and time. The time can be adjusted only when the clock is
running locally. When [BI], [RSM], [IEC] or [IRIG] is active, the adjustment is invalid.
• Enter a numerical value for each item and press the ENTER key. For details to enter a
numerical value, see 4.2.6.1.
• Press the END key to adjust the internal clock to the set hours without fractions and return to
the previous screen.
B
C
1
2
s y n c .
A c t .
I n a c t .
I n a c t .
I n a c t .
Available for model 4 ∗∗ series only.
1 2 / N o v / 2 0 0 1
2 2 : 5 6 : 1 9
5 6
_
2 2
1 2
1 1
2 0 0 1
88
-
3
Cold Load state
6 F 2 S 0 8 2 8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grl150-400 seriesGrl150-100a-10-10

Table of Contents