Toshiba GRL150-100 Series Instruction Manual page 80

Line differential relay
Table of Contents

Advertisement

Record
In the "Record" menu, the fault records event records, disturbance records and counts such as trip
count.
Status
The "Status" menu displays the power system quantities, binary input and output status, relay
measuring element status, signal source for time synchronisation (BI, RSM or IEC60870-5-103),
clock adjustment and LCD contrast.
Set. (view)
The "Set.(view)" menu displays the relay version, description, relay address and baud rate in RSM
or IEC60870-5-103 communication, the current settings of record, status, protection, binary
inputs, configurable binary outputs and configurable LEDs.
Set. (change)
The "Set.(change)" menu is used to change the settings of password, description, relay address and
baud rate in RSM or IEC60870-5-103 communication, record, status, protection, binary inputs,
configurable binary outputs and configurable LEDs.
Since this is an important menu and is used to change settings related to relay tripping, it has
password security protection.
Test
The "Test" menu is used to set testing switches and to forcibly operate binary output relays.
When the LCD is off, press any key other than the VIEW and RESET keys to display the top
"MENU" screen and then proceed to the relay menus.
• R e c o r d
• S t a t u s
• S e t .
• S e t .
• T e s t
To display the "MENU" screen when the digest screen is displayed, press the RESET key to turn
off the LCD, then press any key other than the VIEW and RESET keys.
Press the END key when the top screen is displayed to turn off the LCD.
An example of the sub-menu screen is shown below. The top line shows the hierarchical layer.
The last item is not displayed for all the screens. " " or " " displayed on the far right shows that
lower or upper lines exist.
To move the cursor downward or upward for setting or for viewing other lines not displayed on the
window, use the
and
/ 5
• S c h e m e
• P r o t . e l e m e n t
To return to the higher screen or move from the right side screen to the left side screen in Appendix
M E N U
( v i e w )
( c h a n g e )
keys.
T r i p
s w
79
6 F 2 S 0 8 2 8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Grl150-400 seriesGrl150-100a-10-10

Table of Contents